JCB 520/40

The JCB 520-40 is a compact, manoeuvrable Loadall that boasts improved lifting capacity and lift capacity at reach. 4 equal sized wheels improve tractive effort for excellent loader performance, while soft ground flotation and ground clearance are first class.

Permanent 4-wheel steer, together with a compact machine size, means an exceptionally tight turning circle for great manoeuvrability and handling in small spaces.

JCB 524/50

The JCB 524-50 is the first of JCB’s hugely efficient Diesel max-powered Loadalls. It has a footprint designed for load-bearing and stability. 4 equal sized wheels improve tractive effort for excellent loader performance, while soft ground flotation and ground clearance are first class.

Permanent 4-wheel steer, together with a compact machine size, means an exceptionally tight turning circle for great manoeuvrability and handling in small yards.

JCB 560/80 Agri Super

The JCB 560-80 WASTEMASTER Loadall is the highest capacity machine in the Loadall range. With a massive 6,000kg of lifting capacity and a powerful EcoMax engine, the operational output will be higher than ever. The optional 5m3 bucket providing superb bulk handling also helps this campaign.

JCB 535/95

The JCB 535-95 is a full-sized 3-stage telescopic handler with a huge reach. It uses a highly efficient Diesel max engine and sits on a chassis that’s designed for load-bearing and stability.

The side-mounted JCB engine combines with JCB axles and transmission to ensure a reliable drivetrain performance from well-proven components. There’s instant steering selection between three modes for easy operation, a tight turn radius and great manoeuvrability.

JCB 535/125

The JCB 535-125 Hi-Viz is a major step forward in telescopic handler visibility, particularly the three-quarter view to the rear of the machine. It ís a full-sized 3-stage Loadall with a huge reach and a highly efficient Diesel max engine.

This is achieved via a lowered boom pivot and a reduced-size (though very strong) boom section. The result is a 10% increase in all-round visibility, making the machine easier and faster to operate. To cap it off, there ís a compact reduced-overhang chassis for superb steering and manoeuvrability.

JCB 535/140

The JCB 535-140 Hi-Viz is a major step forward in telescopic handler visibility, particularly the three-quarter view to the rear of the machine. It is a full-sized 34-stage Loadall with a huge reach and a highly efficient Diesel max engine.

This is achieved via a lowered boom pivot and a reduced-size boom section. The result is a 10% increase in all-round visibility, making the machine easier and faster to operate. To cap it off, there is a compact reduced-overhang chassis for superb steering and manoeuvrability.

JCB 540/140

The 540-140 comes with heavy-duty stabilisers as standard. These ensure safe placement of heavy loads to full height. Chassis levelling is an option on this machine, giving improved load ratings when stabilisers are not used and easier transportation of bulky loads on uneven ground.

JCB 540/170

The JCB 540/170 has a multiple stage boom mechanism, and with the stabilisers extended, it can achieve a massive lift height to 16.7 metres with a 2500 kgs load capacity, without compromising manoeuvrability or safety.

The 17 metre range also offers a low boom line giving the operator greater visibility and confidence to move around site safely. An excellent choice for multi-storey projects, offering exceptional lift, reach and rough terrain capabilities. For construction and housebuilding design, the 17 metre range is becoming one of the most versatile and manoeuvrable tools on site

JCB 540/180

JCB’s popular HiViz range of telehandlers, boasting a lift height of 17.5m and a maximum forward reach of 13.5m. That’s a 5% increase in working height over the current 540-170 with a 2,500kg load at full height, plus a 10% increase in forward reach. At just 11,330kg however the new model is 7% lighter than its stablemate, thanks to a strengthened four-stage, chain-driven boom and improved chassis construction.

JCB 540/200

With a 4 tonne maximum lifting capacity, and 20m lift height this is the largest telehandler in our and is morfleet. Forward reach capability (200kg at 15.9m, 1500kg at 8.9m) means the 540-200 can reach across typical building foundations with ease. Servo hydraulic joystick with proportional hydraulics enabling simultaneous lift and extend operations from one lever. 3 mode steer system with short length and compact footprint for maximum manoeuvrability.

MT420 Buggy

Manitou's smallest and most compact telehandler, coming in at only 3.6m long by 1.5m wide! Its designed for indoor and urban use, but due to its extremely tight turning circle can be used in a whole host of applications.

MT625

The Manitou MT625 H telehandler is specially designed for building sites and renovation projects involving lower heights. Its compact dimensions – with a width of 1.8 m and under 2 m in height – mean you can easily pass under thresholds and navigate congested areas. Its 3.3 m turning radius and 3 steering modes available provide you with excellent manoeuvrability. Easy to use, this handler features an ergonomic instrument panel and JSM-equipped joystick to easily execute manoeuvres.

MT835

The performance and manoeuvrability of the new telescopic Manitou MT835 forklift truck lets you carry out all your building and renovation tasks quickly and in complete safety. Platform mode: Full range of Manitou attachments. These forklifts are your allies in your quest for productivity and simplicity

MT932

The Manitou MT932 is a flexible solution in situations where a forklift does not meet the task. This is the multi-functional solution for lifting pallets, hoisting loads or for small-scale earthworks. It is simple to equip the machine with a pallet fork, jib-arm or loader bucket. And that extends flexibility on the site without extra machines taking up space. So you can use this machine to perform the job of a crane while still being able to do ground work with the loader bucket.

MT1030

The MT 1030 Easy telehandler is perfect for masonry, roofing or any construction activity requiring a compact machine while maintaining an efficient load chart. Its low fuel consumption. Easy to use and maintain, a spacious driver's cab, excellent visibility with all of the main controls at your fingertips

MT1335

The MT 1335 is designed with work sites up to two/three storeys tall in mind. It comes equipped with compact outriggers which improve its offset as well as the general performance of the machine as it can easily navigate more confined spaces. Its lifting capacity is 3.5 t up to heights of 13 m. And for the comfort of the operator, the spacious driver's cab is equipped with the JSM system and an ergonomic, intuitive instrument panel, and is easily accessed with its wider door. The MT 1335 is powered by a 102 hp motor with 4-wheel drive for efficiency regardless of the type of terrain. Maintenance is made easy thanks to the double opening for the engine compartment and the diagnostics screen located on the instrument panel. All in all, this handler marries comfort with performance, a perfect combination for medium-height work site operations

MT1440

The Manitou MT1440 telehandler is compact and extremely manoeuvrable. The MT 1440 telehandler is designed for sites requiring increased lifting height and with a lifting capacity of 4 t, pallets can safely be placed and removed at heights of up to 14 m. This robust machine is equipped with a low frame steel door and power windows to reduce the risk of breakage. Cab visibility means you are always in control of what is happening on the site and can visually track loads until they've been placed. Easily transportable from one site to another thanks to a generous number of slinging points, the MT 1440 also has no trouble getting around on its own, regardless of the terrain, thanks to a 42 cm ground clearance, 3 steering modes and 4-wheel drive.

MT1435

The MT1435 fixed-boom telescopic handler is the ideal solution for small building sites. You can move in all directions thanks to this machine's 3 steering modes. You can swap between front axle, crabwise and opposing front and rear axle steering. The levelling jacks increase stability when hoisting loads, while not taking up more ground area than the machine itself.

MT1840

The MT 1840 telehandler is specially designed for high bay/high rise work sites, with a lifting capacity of 4 t up to 18 m in height. Equally at home on uneven terrain, it has a generous ground clearance and tight turning radius, so manoeuvrability never becomes an issue. Additionally, excellent lateral and front stability make it a reliable on-site partner. Robust and design to last, this handler is equipped with a low frame steel door and quality components to ensure longevity. For easy transportability, multiple slinging points have been provided. A true multi-tasker, it can be adapted to meet all of your needs by changing the boom attachment.